docs/Writerside/topics/list.h.md

# List Interface

The `list.h` header defines a common interface for all list implementations.

UCX already comes with two common list implementations ([linked list](linked_list.h.md) and [array list](array_list.h.md))
that should cover most use cases.
But if you feel the need to implement your own list, you will find the instructions [below](#implement-own-list-structures).

```C
#include <cx/linked_list.h>

CxList *cxLinkedListCreate(const CxAllocator *allocator,
        cx_compare_func comparator, size_t elem_size);
        
CxList *cxLinkedListCreateSimple(size_t elem_size);

#include <cx/array_list.h>

CxList *cxArrayListCreate(const CxAllocator *allocator,
        cx_compare_func comparator, size_t elem_size,
        size_t initial_capacity);
        
CxList *cxArrayListCreateSimple(size_t elem_size,
        size_t initial_capacity);
```

The function `cxLinkedListCreate()` creates a new linked list with the specified `allocator` which stores elements of size `elem_size`.
The elements are supposed to be compared with the specified `comparator` (cf. [](#access-and-find)). 
The function `cxLinkedListCreateSimple()` will use the [default allocator](allocator.h.md#default-allocator) and does not specify a compare function. 

Array lists can be created with `cxArrayListCreate()` where the additional argument `initial_capacity` specifies for how many elements the underlying array shall be initially allocated.

If `CX_STORE_POINTERS` is used as `elem_size`, the actual element size will be `sizeof(void*)` and the list will behave slightly differently when accessing elements.
Lists that are storing pointers will always return the stored pointer directly, instead of returning a pointer into the list's memory, thus saving you from unnecessary dereferencing.
Conversely, when adding elements to the list, the pointers you specify (e.g., in `cxListAdd()` or `cxListInsert()`) are directly added to the list, instead of copying the contents pointed to by the argument.

> When you create a list which is storing pointers and do not specify a compare function, `cx_cmp_ptr` will be used by default.

> If you want to lazy-initialize lists, you can use the global `cxEmptyList` symbol as a placeholder instead of using a `NULL`-pointer.
> While you *must not* insert elements into that list, you can safely access this list or create iterators.
> This allows you to write clean code without checking for `NULL`-pointer everywhere.
> You still need to make sure that the placeholder is replaced with an actual list before inserting elements.

## Example

In the following example we create a linked-list of regular expressions for filtering data.

```C
#include <cx/linked_list.h>
#include <regex.h>

CxList *create_pattern_list(void) {
    // create a linked list to store patterns
    CxList *list = cxLinkedListCreateSimple(sizeof(regex_t));
    
    // automatically free the pattern when list gets destroyed
    cxDefineDestructor(list, regfree);
    
    return list;
}

int add_pattern(CxList *list, const char *value) {
    // compile pattern and add it to the list, if successful
    regex_t regex;
    if (regcomp(&regex, value, REG_EXTENDED|REG_NOSUB)) {
        return 1;
    } else {
        // take address of local variable
        // since we are not storing pointers in this list,
        // we get a copy of the data directly in the list
        cxListAdd(list, &regex);
        return 0;
    }
}

bool matches_any(CxList *list, const char *text) {
    CxIterator iter = cxListIterator(list);
    cx_foreach(regex_t*, pat, iter) {
        if (regexec(pat, text, 0, NULL, 0) == 0) {
            return true;
        }
    }
    return false;
}
```

If in the above example the list was created with `CX_STORE_POINTERS` instead of `sizeof(regex_t)`,
the `add_pattern()` function would need to be changed as follows:

```C
int add_pattern(CxList *list, const char *value) {
    // allocate memory here, because now we are storing pointers
    regex_t *regex = malloc(sizeof(regex_t));
    if (!regex || regcomp(regex, value, REG_EXTENDED|REG_NOSUB)) {
        return 1;
    } else {
        cxListAdd(list, regex);
        return 0;
    }
}
```

Also, just registering `regfree()` as a destructor is not enough anymore because the `regex_t` structure also needs to be freed.
Therefore, we would need to wrap the calls to `regfree()` and `free()` into an own destructor, which we then register with the list.
However, it should be clear by now that using `CX_STORE_POINTERS` is a bad choice for this use case to begin with.

As a rule of thumb: if you allocate memory for an element that you immediately put into the list, consider storing the element directly.
And if you are getting pointers to already allocated memory from somewhere else, and you just want to organize those elements in a list, then consider using `CX_STORE_POINTERS`.

## Insert

```C
#include <cx/list.h>

int cxListAdd(CxList *list, const void *elem);

int cxListInsert(CxList *list, size_t index, const void *elem);

void *cxListEmplace(CxList *list);

void *cxListEmplaceAt(CxList *list, size_t index);

CxIterator cxListEmplaceArray(CxList *list, size_t n);

CxIterator cxListEmplaceArrayAt(CxList *list, size_t index, size_t n);

int cxListInsertSorted(CxList *list, const void *elem);

int cxListInsertUnique(CxList *list, const void *elem);

size_t cxListAddArray(CxList *list, const void *array, size_t n);

size_t cxListInsertArray(CxList *list, size_t index,
        const void *array, size_t n);

size_t cxListInsertSortedArray(CxList *list,
        const void *array, size_t n);

size_t cxListInsertUniqueArray(CxList *list,
        const void *array, size_t n);

int cxListInsertAfter(CxIterator *iter, const void *elem);

int cxListInsertBefore(CxIterator *iter, const void *elem);
```

The function `cxListAdd()` appends the element `elem` to the list and returns zero on success or non-zero when allocating the memory for the element fails.
Similarly, `cxListInsert()` adds the element at the specified `index`.

The functions `cxListEmplace()` and `cxListEmplaceAt()` behave like `cxListAdd()` and `cxListInsert()`,
except that they only allocate the memory and return a pointer to it, leaving it to the callee to copy the element data into it.
The same is true for `cxListEmplaceArray()` and `cxListEmplaceArrayAt()`, which allocate memory for `n` elements and return an iterator to the first element.
Be aware that when the list is storing pointers, the allocated memory will be for the pointer, not the actual element's data.

> If `cxListEmplaceArray()` or `cxListEmplaceArrayAt()` is unable to allocate memory for `n` elements,
> the iterator will iterate only over the elements that have been successfully allocated.
> The `elem_count` attribute of the iterator will be set to the number of successfully allocated elements.
> And the `index` attribute will count from zero to `elem_count - 1`.
> {style="note"}

The function `cxListInsertSorted()` inserts the element at the correct position so that the list remains sorted according to the list's compare function.
It is important that the list is already sorted before calling this function.
On the other hand, `cxListInsertUnique()` inserts the element only if it is not already in the list.
In this case it is strongly recommended that the list is already sorted but not required; the function will fall back to an inefficient algorithm when the list is not sorted.

When you are currently iterating through a list, you can insert elements before or after the current position of the iterator
with `cxListInsertBefore()` or `cxListInsertAfter()`, respectively.

If the list is storing pointers (cf. `cxCollectionStoresPointers()`), the pointer `elem` is directly added to the list.
Otherwise, the contents at the location pointed to by `elem` are copied to the list's memory with the element size specified during creation of the list.

On the other hand, the `array` argument for `cxListAddArray()`, `cxListInsertArray()`, `cxListInsertSortedArray()`, and `cxListInsertUniqueArray()`
must always point to an array of elements to be added (i.e., either an array of pointers or an array of actual elements).

The return values of the array-inserting functions are the number of elements that have been successfully _processed_.
Usually this is equivalent to the number of inserted elements, except for `cxListInsertUniqueArray()`,
where the actual number of inserted elements may be lower than the number of successfully processed elements.

> Implementations are required to optimize the insertion of a sorted array into a sorted list in linear time,
> while inserting each element separately via `cxListInsertSorted()` may take quadratic time.
> 
> When used with sorted lists, the arrays passed to the functions must also be sorted according to the list's compare function.
> Only when `cxListInsertUniqueArray()` is used with a list that is not sorted, the array does not need to be sorted.
> 
> The functions do not check if the passed arrays are sorted.
> {style="note"}

## Access and Find

<link-summary>Functions for searching and accessing elements.</link-summary>

```C
#include <cx/list.h>

void *cxListAt(const CxList *list, size_t index);

void *cxListFirst(const CxList *list);

void *cxListLast(const CxList *list);

int cxListSet(CxList *list, size_t index, const void *elem);

size_t cxListFind(const CxList *list, const void *elem);

size_t cxListFindRemove(CxList *list, const void *elem);

bool cxListContains(const CxList *list, const void *elem);

bool cxListIndexValid(const CxList *list, size_t index);

size_t cxListSize(const CxList *list);
```

The function `cxListAt()` accesses the element at the specified `index`.
If the list is storing pointers (i.e. `cxCollectionStoresPointers()` returns `true`), the pointer at the specified index is directly returned.
Otherwise, a pointer to the element at the specified index is returned.
If the index is out-of-bounds, the function returns `NULL`.
The functions `cxListFirst()` and `cxListLast()` behave like `cxListAt()`,
accessing the first or the last valid index, respectively, and returning `NULL` when the list is empty.

The function `cxListSet()` allows you to modify elements at a specific index in the list.
This function replaces the element at the specified `index` with the value pointed to by `elem`.
If the list is storing values directly (not pointers), the contents at the memory location `elem` will be copied into the list.
If the list is storing pointers, the pointer value itself will be stored.
The function returns `0` on success and `1` if the index is out of bounds.

On the other hand, `cxListFind()` searches for the element pointed to by `elem` by comparing each element in the list with the list's compare function
and returns the first index when the element was found.
Otherwise, the function returns the list size.

The function `cxListFindRemove()` behaves like `cxListFind()`, except that it also removes the first occurrence of the element from the list.
This will _also_ call destructor functions, if specified, so take special care when you continue to use `elem`, or when the list is storing pointers and the element appears more than once in the list.

The function `cxListContains()` returns `true` if and only if `cxListFind()` returns a valid index.

With `cxListIndexValid()` you can check the index returned by `cxListFind()` or `cxListFindRemove()`,
which is more convenient than comparing the return value if the return value of `cxListSize()`.  

## Remove

```C
#include <cx/list.h>

int cxListRemove(CxList *list, size_t index);

size_t cxListRemoveArray(CxList *list, size_t index, size_t num);

size_t cxListFindRemove(CxList *list, const void *elem);

int cxListRemoveAndGet(CxList *list, size_t index, void *targetbuf);

int cxListRemoveAndGetFirst(CxList *list, void *targetbuf);

int cxListPopFront(CxList *list, void *targetbuf);

int cxListRemoveAndLast(CxList *list, void *targetbuf);

int cxListPop(CxList *list, void *targetbuf);

size_t cxListRemoveArrayAndGet(CxList *list, size_t index, size_t num,
        void *targetbuf);

void cxListClear(CxList *list);
```

The function `cxListRemove()` removes the element at the specified index and returns zero,
or returns non-zero if the index is out-of-bounds.
The function `cxListRemoveArray()` removes `num` elements starting at `index` and returns the number of elements that have been removed.
For each removed element, the [destructor functions](collection.h.md#destructor-functions) are called.

The function `cxListFindRemove()` finds the first element within the list that is equivalent to the element pointed to by `elem` and removes it from the list.
This will _also_ call destructor functions, if specified, so take special care when you continue to use `elem`.

On the other hand, `cxListRemoveAndGet()` family of functions do not invoke the destructor functions
and instead copy the elements into the `targetbuf`, which must be large enough to hold the removed elements.

> Note that when the list was initialized with `CX_STORE_POINTERS`,
> the elements that will be copied to the `targetbuf` are the _pointers_.
> In contrast to other list functions, like `cxListAt()`, an automatic dereferencing does not happen here. 
>{style="note"}

The function `cxListClear()` simply removes all elements from the list, invoking the destructor functions.
It behaves equivalently but is usually more efficient than calling `cxListRemove()` for every index.

## Iterators

```C
#include <cx/list.h>

CxIterator cxListIterator(const CxList *list);

CxIterator cxListBackwardsIterator(const CxList *list);

CxIterator cxListIteratorAt(const CxList *list, size_t index);

CxIterator cxListBackwardsIteratorAt(const CxList *list, size_t index);
```

The functions `cxListIterator()` and `cxListBackwardsIterator()` create iterators
that start and the first or the last element in the list and iterate through the entire list.

The functions `cxListIteratorAt()` and `cxListBackwardsIteratorAt()` start with the element at the specified index
and iterate until the end, or the beginning of the list, respectively.

Removing elements via an iterator will cause an invocation of the [destructor functions](collection.h.md#destructor-functions) for the removed element. 

It is safe to specify an out-of-bounds index, or a `NULL` pointer, in which cases the returned iterator will behave like an iterator over an empty list.

## Reorder

```C
#include <cx/list.h>

int cxListSwap(CxList *list, size_t i, size_t j);

void cxListReverse(CxList *list);

void cxListSort(CxList *list);
```

The function `cxListSwap()` swaps two elements specified by the indices `i` and `j`.
The return value is non-zero if one of the indices is out-of-bounds.

The function `cxListReverse()` reorders all elements so that they appear in exactly the opposite order after invoking this function. 

The function `cxListSort()` sorts all elements with respect to the list's compare function,
unless the list is already sorted (cf. `cxCollectionSorted()`), in which case the function immediately returns.

Default UCX implementations of the list interface make use of [small buffer optimizations](install.md#small-buffer-optimizations) when swapping elements.

> An invocation of `cxListSort` sets the `sorted` flag of the [collection](collection.h.md).
> Implementations usually make use of this flag to optimize search operations, if possible.
> For example, the [array list](array_list.h.md) implementation will use binary search
> for `cxListFind()` and similar operations when the list is sorted.

## Compare

```C
#include <cx/list.h>

int cxListCompare(const CxList *list, const CxList *other);
```

Arbitrary lists can be compared element-wise with `cxListCompare()`, as long as the compare functions of both lists are equivalent.

That means you can compare an UCX [array list](array_list.h.md) with a [linked list](linked_list.h.md),
and you could even compare lists that are storing pointers with lists that are not storing pointers.

However, the optimized list-internal compare implementation is only used when both the compare functions and the list classes are identical.
Otherwise, `cxListCompare()` will behave as if you were iterating through both lists and manually comparing the elements.

The return value of `cxListCompare()` is zero if the lists are element-wise equivalent.
If they are not, the non-zero return value equals the return value of the used compare function for the first pair of elements that are not equal. 

## Clone

```C
#include <cx/allocator.h>

typedef void*(cx_clone_func)(
        void *target, const void *source,
        const CxAllocator *allocator,
        void *data);

#include <cx/list.h>

int cxListClone(CxList *dst, const CxList *src,
        cx_clone_func clone_func,
        const CxAllocator *clone_allocator,
        void *data);

int cxListDifference(CxList *dst,
        const CxList *minuend, const CxList *subtrahend,
        cx_clone_func clone_func,
        const CxAllocator *clone_allocator,
        void *data);
```

With `cxListClone()` you can create deep copies of the elements in a list and insert them into another list.
The destination list does not need to be empty, in which case the elements will be appended.
Depending on the concrete list implementation, `cxListClone()` tries to allocate enough memory up-front, before trying
to insert anything.

The function `cxListDifference()` is similar to `cxListClone()`,
except that it only clones elements from the minuend that are _not_ contained in the subtrahend.
It is optimized for sorted lists, in which case it will take linear time instead of quadratic time for the operation.

Refer to the documentation of the [clone-function callback](allocator.h.md#clone-function) to learn how to implement it.

The functions return zero if and only if all clone operations were successful.

> It is perfectly possible to clone items into a list of a different type.
> For example, you can clone elements from a list that is just storing pointers (`CX_STORE_POINTERS`) to a list that
> allocates the memory for the objects (and vice versa).

## Dispose

```C
#include <cx/list.h>

void cxListFree(CxList *list);
```

No matter with which function a `CxList` has been created, you can _always_ deallocate the entire memory with a call to `cxListFree()`.

The effect is equivalent to invoking `cxListClear()` plus deallocating the memory for the list structure.
That means, for each element in the list, the [destructor functions](collection.h.md#destructor-functions) are called before deallocating the list.

When the list has been storing pointers, make sure that either another reference to the same memory exists in your program,
or any of the destructor functions deallocates the memory.
Otherwise, there is a risk of a memory leak.

## Implement own List Structures

If you want to create your own list implementation, this is extremely easy.

You need to define a function for creating your list and assign a `cx_list_class` structure with the pointers to your implementation.
Then you call the `cx_list_init()` helper function to initialize the collection sture.
This also automatically adds support for `CX_STORE_POINTERS` to your list. 

```C
// define the class with pointers to your functions
static cx_list_class my_list_class = {
        my_list_deallocate,
        my_list_insert_element,
        my_list_insert_array,
        my_list_insert_sorted,
        my_list_insert_unique,
        my_list_insert_iter,
        my_list_remove,
        my_list_clear,
        my_list_swap,
        my_list_at,
        my_list_find_remove,
        my_list_sort,
        my_list_compare,
        my_list_reverse,
        my_list_iterator,
};

typedef struct {
    struct cx_list_s base;
    // your custom list data goes here
} my_list;

CxList *my_list_create(
        const CxAllocator *allocator,
        cx_compare_func cmpfun,
        size_t elem_size
) {
    if (allocator == NULL) {
        allocator = cxDefaultAllocator;
    }

    my_list *list = cxCalloc(allocator, 1, sizeof(my_list));
    if (list == NULL) return NULL;
    cx_list_init((CxList*)list, &my_list_class,
            allocator, cmpfun, elem_size);
            
    // initialize your custom list data here

    return (CxList *) list;
}
```

The required behavior for the implementations is described in the following table.
You can always look at the source code of the UCX implementations to get inspiration.

| Function         | Description                                                                                                                                                                                                                                                                                                                |
|------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| `clear`          | Invoke destructor functions on all elements and remove them from the list.                                                                                                                                                                                                                                                 |
| `deallocate`     | Invoke destructor functions on all elements and deallocate the entire list memory.                                                                                                                                                                                                                                         |
| `insert_element` | Insert or allocate a single element at the specified index. Return a pointer to the allocated element or `NULL` on failure.                                                                                                                                                                                                |
| `insert_array`   | Insert or allocate an array of elements starting at the specified index. Return the number of successfully inserted or allocated elements.                                                                                                                                                                                 |
| `insert_sorted`  | Insert an array of sorted elements into a sorted list. Return the number of elements processed (equals the number of elements inserted in this case).                                                                                                                                                                      |
| `insert_unique`  | Insert an array of sorted unique elements into a sorted list. Return the number of elements processed (not the number of elements inserted, which might be lower).                                                                                                                                                         |
| `insert_iter`    | Insert a single element depending on the iterator position. The third argument to this function is zero when the element shall be inserted after the iterator position and non-zero if it shall be inserted before the iterator position. The implementation is also responsible for adjusting the iterator, respectively. |
| `remove`         | Removes a multiple elements starting at the specified index. If a target buffer is specified, copy the elements to that buffer. Otherwise, invoke the destructor functions for the elements. Return the number of elements actually removed.                                                                               |
| `swap`           | Swap two elements by index. Return zero on success or non-zero when any index was out-of-bounds.                                                                                                                                                                                                                           |
| `at`             | Return a pointer to the element at the specified index or `NULL` when the index is out-of-bounds.                                                                                                                                                                                                                          |
| `find_remove`    | Search for the specified element with the list's compare function and return the index if found. If the `remove` argument is true, invoke the destructor functions and remove the element. Return the list size if the element is not found.                                                                               |
| `sort`           | Sort all elements in the list with respect to the list's compare function.                                                                                                                                                                                                                                                 |
| `compare`        | Only function pointer that may be `NULL`, in which case an unoptimized fallback is used. You can implement an optimized compare function that compares the list of another list of the same class.                                                                                                                         |
| `reverse`        | Reorders all elements in the list so that they appear in exactly the opposite order.                                                                                                                                                                                                                                       |
| `iterator`       | Creates an iterator starting at the specified index. The Boolean argument indicates whether iteration is supposed to traverse backwards.                                                                                                                                                                                   |

> If you initialize your list with `cx_list_init()`, you do not have to worry about making a
> difference between storing pointers and storing elements, because your implementation will
> be automatically wrapped.
> This means you only have to handle the one single case described above.

### Default Class Function Implementations

If you are satisfied with some of the default implementations, you can use some pre-defined functions.
Note, however, that those are not optimized for any specific list structure
and just serve as a quick and convenient solution if performance does not matter for your use case.


| Default Function                | Description                                                                       |
|---------------------------------|-----------------------------------------------------------------------------------|
| `cx_list_default_insert_array`  | Falls back to multiple calls of `insert_element`.                                 |
| `cx_list_default_insert_sorted` | Uses linear search to find insertion points.                                      |
| `cx_list_default_insert_unique` | Like `cx_default_insert_sorted` but skips elements that are already contained.    |
| `cx_list_default_sort`          | Copies all elements to an array, applies `qsort()`, and copies the elements back. |
| `cx_list_default_swap`          | Uses a temporarily allocated buffer to perform a three-way-swap.                  |


<seealso>
<category ref="apidoc">
<a href="https://ucx.sourceforge.io/api/list_8h.html">list.h</a>
</category>
</seealso>